Product Summary:
Up to Print Speed Approx 43 sec. Up to Resolution 287 x 287 dpi 256 levels Per Colour Modern and Compact Design Rechargeable Battery Power USB Micro-B Interface iOS & Android devices Compatible
Product Description:
The Selphy Square QX10 produces beautifully bright and clear square
photo prints, picking up smooth gradations, reproducing colours
faithfully and expressing black tones well. The 1:1 square shaped photo
paper also has an option to peel the back for a sticky surface.
100-year prints
At
the end of the printing process, photos are covered by an overcoat
finish, giving the photos a glossy appearance and protecting them from
water and dirt, while also preventing them from smearing and fading. The
addition of the overcoat finish will enable an album storage lifespan
of up to 100 Years.
Water and dust resistant
No need to worry
if drops of water get on your photos. A special film overcoated on the
surface of the photos repels water and prevents ink from bleeding. If
water is accidentally spilled, just wipe it off.
Printing System
Method
Dye-sublimation thermal transfer printing system
Maximum resolution
287 x 287 dpi
Colours
3 colour inks (yellow, cyan, magenta) with protective over coating
256 levels per colour (24 bit colour depth)
Media & Cartridge
Sticker paper
72 x 85 mm, 68 x 68 mm printable area
Ink Cartridge
Included with media
Image Longevity
100 Years Print 1
Print Speeds
Sticker paper
approx. 43 sec 2
Printing
Print Modes & Settings
Controlled by SELPHY Photo Layout app
Print Method
Direct From a Smart Device
Compatible iOS and Android devices via Direct Wi-Fi, using app SELPHY Photo Layout
Power Source
AC Power Supply
Not supported
Battery Pack
Built-in, 20 sheet maximum print capacity per full charge
Power Consumption
3W or less (standby), 62W or less (printing)
Accessories
Media
Color Ink / Label Set XS-20L
Other
USB Micro B connector to USB Type-A connector for charging (included)
All data is based on Canon's standard testing methods.
Subject to change without notice.
To
test the image permanence of prints that are stored in an album, we use
an accelerated testing method similar to how the image permanence of
silver-halide photo papers are measured when stored in dark places.
Print samples are printed with the optical density of 1.0 (each Bk, C,
M,Y). The samples are kept in a certain environment of high temperature
and 50% humidity. The rate of the decrease in the optical density and
rate of yellow discoloration are recorded. The recorded results are then
converted to the length of time when print image is kept in an
environment of 23?/ 50% humidity. 'The point where monochromatic/
reflective optical density shows loss of 30% (starting density of 1.0).
Print
speed can vary dependent on data size, print method, and print finish
setting. Print speed is measured from start of printing excluding paper
handling
|
Download .pfd brochure for Canon Selphy Square QX10 Black Compact Photo Printer
Image may differ from actual product
|